3 Ways to Get Rust from Your Pocket Knife

Every camper, homesteader and prepper likely has that one, trusted tool that they carry with them absolutely everywhere they go. They’re cherished, reliable pocket knife.

From camping expeditions to training days or just running errands around town, we call on our pocket knives for all sorts of tasks, from the mundane slicing of tape to the heavy-duty business of slashing through stuck webbing or vines.

We ask an awful lot from our knives, and if you use your knife often, or just carry it often, it is probably only a matter of time before your favorite companion picks up a little bit of rust.

Now, for the collector or the knife hoarder, rust formation will very likely result in red-faced fits of rage and copious tears but for us, this is just one more thing we’ve got to take care of. We sharpen our own knives, and we need to remove rust from them, too.

But if you have never done it before, rust removal might seem like a bit of a puzzle. How are you supposed to get this hard stuff off the knife without hurting the steel that is host to it?

I will show you how to do that and more, with three surefire, tried and tested methods for removing rust from your favorite pocket knife.

Get That Rust Off!

Okay, time to get down to business because, the longer you let rust remain on your knife, the worse the damage will be. It doesn’t matter how that rust showed up on your knife.

Maybe you carried it on some seriously hard-working days where you sweated right through your clothes, drenching it with salty perspiration.

Maybe it rode with you on a trip down to the beach. Maybe it got completely soaked during a river crossing. Maybe your knife is just made of comparatively delicate carbon steel and you didn’t oil it after you were done handling it.

All you need to know is the rust shouldn’t be there and we need to gather our tools to ensure its elimination.

Now, I will give you a short list of items to gather here in just a minute, but I want to impress upon every reader, especially those who are not knife aficionados that you should not attempt to remove rust from a knife, or use a knife, that is showing severe rusting or pitting on the blade, locking surfaces or other critical components.

Rust is corrosion, and where rust forms the degradation and eventual disintegration of metal follows. If you have any doubts about the structural integrity or safety of your knife, consult a professional bladesmith or the manufacturer for guidance. A mishap with any knife can result in severe lacerating or penetrating injuries. You have been warned!

Tools of the Trade

Okay, disclaimer over. Time to go shopping. Luckily you won’t have to go far because you probably already have most of these supplies in your very own home:

Steel wool

Steel wool is typically used for serious rust removal, but for badly neglected blades this is just the ticket. You’ll want to pick up 000 and 0000 grade steel wool. Be warned, steel wool will easily leave swirly cobweb marks on nearly any finish.

Copper brush

This looks like a toothbrush but one with bristles made from copper, not plastic. Definitely don’t use this on your teeth.

Note; make sure you are getting a genuine copper brush, not one made from bronze or phosphor bronze. They look alike, but bronze is far more aggressive than copper, too aggressive for our purposes.

Coin, penny, pre-1981

This isn’t a joke. You need an actual copper penny. If you find one dated from the year 1981 or before you’ll know it is genuine copper so long as it has that reddish color to it. We can use this as a steel safe scraper to bust off the gnarliest rust deposits.

Disposable gloves

We’ll be working with various lubricants and chemicals for the process that we don’t necessarily want lingering on our skin. Plus, particles of rust can stain like the dickens, so where are some good disposable gloves while you work.

Rag

Use a 100% natural fiber rag while you work, both to protect your work surface and to wipe off the knife as you work. Avoid synthetic fibers, because they can melt or turn to sludge when exposed to harsh rust removers.

Rust removal solution

Specialty rust removers are a dime a dozen, and you don’t need to get one that is specially formulated for knives unless you have serious doubts about the aggressiveness of the solution in question. If you don’t have any rust remover, you can use typical gun bore cleaner in a pinch.

Oil

Oil provides lubrication for the rust removal process when dealing with light rust and will treat your blade when you are done to prevent further formation or accumulation of rust. Almost anything will do here, you can even grab a little bit off your car’s dipstick in a pinch.

Vise or clamps

Sometimes you need a third hand to hold your knife while you really go to town on removing hardcore rust. A bench vise or sturdy, padded clamp can do that for you.

Three Options for Rust Removal

Now that we have gathered our needed materials, it is time to get started. Start by protecting your work area, donning any protective gear you might need and then gathering your tools for the job.

Then, we will attack the rest using a successively more aggressive methodology in order to do the least possible harm to the metal of the knife as well as the finish.

But before we do that, look your knife over well and consider how the rust got there. Do you notice a couple of reddish fingerprints on your blade? That is probably from handling or from an errant touch with sweaty fingertips.

No disassembly required. Is the knife covered and rust from stem to stern because you dropped it in a puddle or had it in your pocket during a river crossing? You’ll probably need to take it apart and detail it.

Do what needs to be done, then try the following procedures in order. If you complete all three steps and still have issues with rust, you’ll need to leave it to the pros unless you want to risk damaging or destroying the knife.

Option #1: Treat and Wipe Down

For dealing with light deposits of rust, especially hardy steel or incidental dust rust that typically occurs from handling, this method is probably all that will be required.

At worst, you might need to soak the affected area of the knife in the rust remover for a short period of time but nothing more than that.

Do the following:

1. Soak a patch or another, small rag with your rust remover solution.
2. Start wiping the affected area of the knife in the direction of the grain of the steel and watch for the rust to start coming off. You should notice reddish or brownish streaks on your rag or patch.
3. If that fails to budge the rust, it is time to soak the affected area. Re-soak your rag or get a new patch and place it in contact with the affected area. Follow the manufacturer’s instructions for the rust remover and don’t leave it on too long.
4. Once the prescribed amount of time has passed, repeat the first two steps and see if the rust comes off.
5. If the rust did come off, you are done, wipe the knife dry and then re lubricate as normal. If the rust did not come off, wipe it dry but don’t re-lubricate it and move on to the next method.

Option #2: Brush It

Assuming the first step in this process didn’t work, don’t worry. There is no need to panic and still plenty of opportunity to get the rust off your trusty pocket knife. Nonetheless it is time to bust out more substantial tools like that copper brush on your shopping list above.

However, understand going into it that despite the comparative gentleness of a copper brush compared to a bronze one and however tough you think the finish of your knife is there is a chance that you will leave cobweb marks behind.

Do the following:

1. Thoroughly wet the rusty parts of the knife with your rust remover solution.
2. Splash a little bit of the rust remover solution on your copper brush.
3. Gently scrub the brush back and forth over the rust being cautious to move only in the direction of the grain visible in the steel.
4. Check regularly as you go for removal or degradation of the rust. If no rust is coming off, start slowly increasing pressure.
5. Add more rust removal solution as you need it throughout the process.
6. Once you get the rust off, wipe the knife dry with a clean cloth as before and then re lubricate it. If this process still didn’t get the rust off or stubborn rust remains behind, wipe it dry but don’t re-lube it and then move to the final step.

Option #3: Scrape It

If you have made it this far you must be dealing with some fairly serious rust and our final step is similarly serious. Here we bust out the penny and the steel wool, two tools that are pretty likely to mar the finish of your knife.

Understand that if you try to do anything more than this you risk seriously damaging your knife at worst, or badly harming the finish at best.

Try the following steps before you throw in the towel:

1. Thoroughly soak the affected area of the knife with your rust removal solution, and allow it to sit for the manufacturer’s prescribed time.
2. After soaking is completed, use the penny and firmly try to scrape off the rust deposits in the direction of the grain, forward or backward. The penny should prove to be strong enough to cut through and crush any rust deposits, but not damage the steel of your knife. Note that the penny will leave behind copper swipe marks but they are easily enough removed.
3. Once major surface deposits of rust are removed, wipe the knife clean, reapply rust remover and break out the steel wool.
4. Start with 0000 steel wool. Gently swipe over remaining, fine rust moving only in the direction of the grain present in the metal. Resist the temptation to scrub in tiny circles or back and forth motions as this will leave glaringly obvious cobweb marks in your finish.
5. If the 0000 steel wool did not work, wipe off, we went with rust remover and then try the same process again with the 000 wool and observe for any improvement.
6. Hopefully the rest is now finally gone. If it is, wipe the knife dry with a clean cloth, re lubricate and get back in business. If, however, this fails to remove the rust you should seek professional help if you want to save the knife without risking further harm.

Got it off, now keep it off

And I’m not talking about the weight that is keeping you from squeezing back into your fighting trim blue jeans.

Once you have removed the rust from your pocket knife, you can save yourself a ton of ass pain by taking steps to prevent the rest from accumulating again.

This is easier said than done if your knife was pitted by said rust because those pits easily trap moisture and help the rust erupt again.

Consider the following steps and options for preventing rust on your knife or perhaps rust proofing it entirely:

• Keep your knife lubricated. If you make the weekly or bi-weekly lubrication of your knife one of your typical end of day chores, you’ll start to enjoy it and your knife won’t rust. Compared to a firearm, it takes only seconds to lubricate a knife enough to prevent corrosion.
• Knives that are used or carried in hostile, corrosive environments must be cleaned and lubricated far more frequently than ones in less hostile environments. By the same token, knives that feature especially vulnerable steels or finishes must be maintained more often likewise.
• Don’t keep your knife in any kind of case, pouch or other soft container any longer than you have to to carry it or make use of it. Soft materials soak up moisture and keep it against the knife that they carry, exacerbating rust. Leather is awesome, but a serious perpetrator in this regard.
• You might consider having your knife refinished with any number of hard use finishes that will greatly reduce the chances that rust can form, at least on the finished parts. Certain non-metallic finishes cannot rust at all, greatly reducing maintenance concerns and worry so long as they are applied correctly. Your local bladesmith or dealer can direct you.

Conclusion

Any tool that we carry and use often will be subjected to its fair share of rusting and this has ever been an issue for our constant companion, our pocket knife.

Rust is just a fact of life, but you needn’t sweat this aggravating inconvenience now that you know how to deal with it however minor or severe it might be.

A few minutes time and a tiny bit of elbow grease are more than enough to banish rust and restore your knife to beautiful, lovingly used condition, ready to go to work again.